Sierra 3500 Denali 4WD V8-6.0L (2011)
11. Remove the cooling fan shroud bolts.
12. Remove the cooling fan and shroud.
Installation Procedure
Note: Insert the 3 lower tabs into the radiator support flange. Keeping the shroud parallel to the radiator will ensure the correct installation of the
lower tabs.
1. Install the cooling fan and shroud.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the cooling fan shroud bolts.
Tighten the bolts to 9 Nm (80 lb in).
