Sierra 3500 Denali 4WD V8-6.0L (2011)
Caution: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the
camshaft bearings.
10. Install the camshaft sprocket bolt into the camshaft front bolt hole.
11. Using the bolt as a handle, carefully rotate and remove the camshaft from the engine block.
12. Remove the bolt from the camshaft.
Installation Procedure
1. Lubricate the camshaft journals and the bearings with clean engine oil.
2. Install the camshaft sprocket bolt into the camshaft front bolt hole.
Caution: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the
camshaft bearings.
3. Using the bolt as a handle, carefully install the camshaft into the engine block.