Sierra 3500 Denali 4WD V8-6.0L (2011)
10. Remove the EN 46330 .
11. Tighten the camshaft sprocket bolt
1. Tighten the bolt a first pass to 75 Nm (55 lb ft).
2. Tighten the bolt a final pass an additional 50 degrees using J 45059 .
10. Remove the EN 46330 .
11. Tighten the camshaft sprocket bolt
1. Tighten the bolt a first pass to 75 Nm (55 lb ft).
2. Tighten the bolt a final pass an additional 50 degrees using J 45059 .