Sierra 3500 Denali 4WD V8-6.0L (2011)
7. Raise the rear axle using the adjustable jack stands, if necessary.
8. Install the rear shock absorber lower bolts and nuts, if necessary and tighten to 95 Nm (70 lb ft).
9. If equipped with a 10.5 inch ring gear, install the rear axle vent hose to the rear axle, if necessary.
10. Connect the vent hose swivel clip to the rear brake crossover pipe, if necessary.
11. If equipped with a 8.6 or a 9.5 inch ring gear, install the rear axle vent hose to the rear axle, if necessary.
12. Install the vent hose swivel clip to the rear brake crossover pipe, if necessary.
13. Remove the adjustable jack stands from under the rear axle, if necessary.
14. Install the spare tire, if necessary.
15. Lower the vehicle.
Exhaust Muffler Replacement (43 Series ZW9)
Exhaust Muffler Replacement (L96 43 Series ZW9)
