Sierra 3500 Denali 4WD V8-6.0L (2011)
1. Position the negative battery cable to the battery.
2. Install the negative battery cable clamp onto the battery terminal.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the negative cable clamp nut (1) to 5 Nm (44 lb in).
Battery Negative Cable Disconnection and Connection (TP2)
Battery Negative Cable Disconnection and Connection (TP2)
Disconnect Procedure
Warning: Refer to Battery Disconnect Warning (See: Service Precautions).
1. Turn off all the lamps and accessories.
2. Turn the ignition OFF.