Sierra 3500 Denali 4WD V8-6.0L (2011)
1. Install the positive battery cable (1) to the vehicle.
2. Connect the positive battery cable electrical connector (1) to the drive motor generator control module.
3. Install the positive battery cable clip (5) to the fender inner panel.
4. Install the positive battery cable clip (4) to the air cleaner support bracket.
5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Service and Repair).
6. Raise and suitably support the vehicle enough to work through the wheel opening.
7. Working through the wheel opening, install the positive battery cable clip (3) to air cleaner adapter bracket
8. Working through the wheel opening, install the positive battery cable clip (2) to the brake pipe.
9. Fully raise the vehicle.
