Sierra 3500 Denali 4WD V8-6.0L (2011)
5. Install the battery positive cable (4), the generator battery jumper cable (5), the intake air heater cable (6), the battery positive junction block cable
(7), the battery positive cable (8), and the starter solenoid cable (9).
6. Install the fuse block retaining nuts (3) and tighten to 9 Nm (80 lb in)
7. Tighten the battery positive clamp nut (2) to 9 Nm (80 lb in)
8. Install the mega-fuse block cover (1).
9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (See: Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (TP2) (See: Battery/Battery Cable/Negative/Service
and Repair).
175 Amp Mega Fuse Replacement (Primary Battery)
175 Amp Mega Fuse Replacement (Primary Battery)
