Sierra 3500 Denali 4WD V8-6.0L (2011)
3. Connect the power brake booster inlet hose (4) to the power steering pump (2).
4. Tighten the power brake booster inlet hose fittings to 33 Nm (24 lb ft).
5. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair).
6. Clean any excess fluid from the vehicle.
7. Remove the drain pans.
Power Brake Booster Outlet Hose Replacement
Power Brake Booster Outlet Hose Replacement (L96)
