Sierra 3500 Denali 4WD V8-6.0L (2011)
2. Install the 2-4 servo.
3. Install the J 29714-A .
4. Tighten the bolt on J 29714-A in order to compress the servo cover.
5. Install the servo cover ring.
6. Remove the J 29714-A .
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
7. Install the oil pan bolt.
Tighten the bolt to 11 Nm (97 lb in).
8. Raise the transmission.
9. Install the transmission crossmember. Refer to Transmission Support Crossmember Replacement (2WD 1500 Series) (See: Body and
Frame/Frame/Cross-Member/Service and Repair/Transmission Support Crossmember Replacement (2WD 1500 Series))Transmission Support
Crossmember Replacement (4WD 1500 Series) (See: Body and Frame/Frame/Cross-Member/Service and Repair/Transmission Support
Crossmember Replacement (4WD 1500 Series))Transmission Support Crossmember Replacement (2WD 2500/3500 Series) (See: Body and
Frame/Frame/Cross-Member/Service and Repair/Transmission Support Crossmember Replacement (2WD 2500/3500 Series))Transmission
Support Crossmember Replacement (4WD 2500/3500 Series) (See: Body and Frame/Frame/Cross-Member/Service and Repair/Transmission
Support Crossmember Replacement (4WD 2500/3500 Series)).
10. Remove the transmission jack.
11. Install the heat shield and bolts.
Tighten the bolts to 17 Nm (13 lb ft).
