gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Procedures|Page 5622 > < Procedures|Page 5620
Page 4
background image

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

1. Install the drain plug and tighten to 33 Nm (24 lb ft).
2. Fill the rear drive axle.

*

Use the proper fluid, refer to Approximate Fluid Capacities   (See: Maintenance/Specifications).

*

For the proper capacity, refer to Fluid and Lubricant Recommendations   (See: Maintenance).

3. Install the fill plug and tighten to 33 Nm (24 lb ft).
4. Remove the support and lower the vehicle.

Differential Oil Replacement (10.5 Inch Axle)

Differential Oil Replacement (10.5 Inch Axle)

Removal Procedure

Procedures|Page 5622 > < Procedures|Page 5620