gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Procedures|Page 5624 > < Procedures|Page 5622
Page 6
background image

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

1. Install the rear axle drain plug (1) and tighten to 33 Nm (24 lb ft).
2. Fill the rear axle with the proper fluid. Refer to Approximate Fluid Capacities   (See: Maintenance/Specifications) and Fluid and Lubricant

Recommendations   (See: Maintenance).

3. Install the fill plug (1) and tighten to 33 Nm (24 lb ft).
4. Remove the support and lower the vehicle.

Differential Oil Replacement (11.5 Inch Axle)

Differential Oil Replacement (11.5 Inch Axle)

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle   (See: Maintenance/Vehicle Lifting/Service and Repair) in General Information.

Procedures|Page 5624 > < Procedures|Page 5622