Sierra 3500 Denali 4WD V8-6.0L (2011)
2. Using the EN 44215 - installer (1) and the J 8092 - handle (2), install the NEW front drive axle inner axle shaft seal.
Note: Carefully tap the inner axle shaft into place with a soft-faced mallet.
3. Install the inner axle shaft into the inner axle shaft housing.
4. Assembly the front drive axle inner axle shaft housing assembly and install it in the vehicle. Refer to Front Drive Axle Inner Shaft and Inner Shaft
Housing Replacement (8.25 F4WD Axle) (See: Service and Repair/Removal and Replacement/Front Drive Axle/Front Drive Axle Inner Shaft
and Inner Shaft Housing Replacement (8.25 F4WD Axle))Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 S4WD and
9.25 Axles) (See: Service and Repair/Removal and Replacement/Front Drive Axle/Front Drive Axle Inner Shaft and Inner Shaft Housing
Replacement (8.25 S4WD and 9.25 Axles)).
5. Fill the differential carrier assembly. Use the correct fluid. Refer to Front Axle Lubricant Replacement (See: Fluid - Differential/Service and
Repair/Removal and Replacement/Front Drive Axle).
6. Lower the vehicle.