Sierra Classic 1500 2WD V8-4.8L (2007)
1. Install the left engine mount to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount bolts to the engine.
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
3. Lower the engine.
4. Remove the adjustable jack stands.
5. For vehicles with 4WD, install the front propeller shaft. Refer to Front Propeller Shaft Replacement.
6. Install the engine mount-to-engine mount bracket bolts. (Right side shown, left side similar).
Tighten the engine mount-to-engine mount bracket bolts to 65 Nm (48 ft. lbs.).
7. Install the wheelhouse panel to the vehicle.
8. Install the tire and wheel.
9. Lower the vehicle.