Sierra Classic 1500 2WD V8-4.8L (2007)
Notice: Refer to Fastener Notice.
2. Install the upper anchor bolt.
Tighten the bolt to 53 N.m (39 lb ft).
3. Install the retractor tower cover.
4. Install the retractor tower cover retaining screw.
Tighten the screw to 2 N.m (18 lb in).
5. Install the retractor.
6. Install the retractor bolt.
Tighten the bolt to 53 N.m (39 lb ft).
7. Install the rear cardboard panel retainers.
8. Install the seat back cover and pad.
9. Move the seat to its original position.