Sierra Classic 1500 2WD V8-5.3L Hybrid (2007)
3. Notice:
Refer to Power Steering Hose Disconnected Notice.
Place a drain pan under the vehicle.
4. Siphon the fluid from the reservoir to prevent excess spillage.
5. Remove the clamp retaining the power steering cooler inlet hose (3) to the power steering gear.
6. Remove the clamp retaining power steering cooler outlet hose (2) to the power steering pump (1).
7. Remove the bolts (2) retaining the power steering cooler from the radiator support.
8. Remove the power steering cooler from the vehicle.
Installation Procedure
1. Notice:
Refer to Fastener Notice.
Install the power steering cooler (1) to the radiator support.
Tighten the bolts retaining the power steering cooler to 5 Nm (44 inch lbs.).
