Sierra Classic 1500 2WD V8-5.3L Hybrid (2007)
Flex Plate: Service and Repair
Flexplate Replacement (5.3L Engine w/RPO HP2)
Tools Required
^
J 46093 Rotor and Flexplate Holding Tool
Removal Procedure
1. Remove the transmission. Refer to Transmission Replacement.
Notice:
Refer to Fastener Notice.
2. Install the J 46093 (1) and bolts. The flange of the J 46093 should locate into the hole in the flexplate. Use two M10 1.5 x 40 mm bolts for proper
tool operation.
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Remove the flexplate bolts.
4. Remove the flexplate.
Installation Procedure