Sierra Classic 1500 4WD V6-4.3L (2007)
Oil Filter Adapter: Service and Repair
Oil Filter Adapter Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the oil pan drain plug and drain the oil into a suitable container.
3. Remove the oil filter.
4. Remove the oil filter adapter.
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the oil pan drain plug into the drain pan.
Tighten the plug to 25 Nm (18 ft. lbs.).
