Sierra Classic 1500 4WD V8-5.3L (2007)
Installation Procedure
1. Attach the recliner cable to the recliner mechanism.
2. Install the drive cable, if equipped with a power recliner.
3. Install the U-channel (1).
Notice: Refer to Fastener Notice .
4. Install the recliner screw (5).
Tighten the screw to 10 N.m (89 lb in).
5. Install the front recliner attachment bolts (4).
Tighten the bolts to 53 N.m (39 lb ft).
6. Attach the recliner cable (1) to the folding mechanism (3).
7. Attach the bolts holding the seat back folding mechanism.
Tighten the bolts to 21 N.m (15 lb ft).
8. Install the outboard pivot bolt.
