gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Accessories - Pick Up Box Accessory Mounting Information|Page 22669 > < Body - Tonneau Cover Fits To Loose On Vehicle|Page 22664
Page 1
background image

Truck Bed Storage Compartment: Technical Service Bulletins
Accessories - Pick Up Box Accessory Mounting Information

INFORMATION

Bulletin No.: 09-08-66-011A

Date: October 04, 2010

Subject: Information on Mounting Points for Pickup Box Accessories

Models:

2007-2011 Chevrolet Silverado
2007-2011 GMC Sierra

Supercede:
This bulletin is being revised to add the 2011 model year. Please discard Corporate Bulletin Number 09-08-66-011 (08 - Body and Accessories).

The pickup box was designed for the use of add-on equipment. However there are specific mounting points that must be used along with weight
restrictions, refer to the following: Chart 1 - Weight Restrictions for Pickup Box Add-Ons. Structural members have been added to provide load paths
directly to the platform cross-sills and into the vehicle frame. Aftermarket accessories should take advantage of these intended load paths as detailed
below in Figures 1-4. Depending on the accessory design, it may be necessary to add some form of a spacer under the accessories at the structural hard
points to take up any gap. Do not use the GM Cargo Management Option mounting points for attaching anything other than the GM Cargo Management
system as referenced in Figure 5.

Figure 1 - Side View - Structural Members

Figure 2 - Top View - Structural Members

Figure 3 - Top View - Front Structure

Accessories - Pick Up Box Accessory Mounting Information|Page 22669 > < Body - Tonneau Cover Fits To Loose On Vehicle|Page 22664