Sierra Classic 1500 4WD V8-5.3L (2007)
INSTALLATION PROCEDURE
1. Install the insulator (1) onto the EVAP canister purge solenoid (3).
2. Install the EVAP canister purge solenoid (3).
NOTE: Refer to Fastener Notice.
3. Install the EVAP canister purge solenoid bolt (2).
Tighten the bolt to 10.5 N.m (93 lb in).
4. Connect the EVAP canister purge solenoid electrical connector (1).
5. Install the EVAP line to the canister purge solenoid (1).
6. Install the engine sight shield.
