Sierra Classic 1500 4WD V8-5.3L (2007)
6. Important:
The distance from the torque converter mounting lugs to the transmission mounting face is an important measurement. It is required to check
correct reassembly of the torque converter.
Measure from the mounting lugs to the transmission mounting face.
7. Install J 46409 180 degrees apart into 2 lugs on the front of the torque converter.
8. Caution:
Avoid personal injury or property damage when removing or installing the torque converter by seeking an assistant to help lift the torque
converter.
Lift the torque converter free of the transmission and place it on the work table.
9. Remove the lifting handles.
Installation Procedure
1. Lubricate the converter pump hub OD and the torque converter seal with clean transmission fluid.