Sierra Classic 1500 4WD V8-5.3L (2007)
15. Remove the outer hub bearing and bearing cup using the J 24426 (2) and the J 8092 (1).
Installation Procedure
1. Lubricate the following with a light coat of high melting point EP bearing lubricant:
^
The outer wheel bearing
^
The inner wheel bearing
^
The outer wheel bearing cup
^
The inner wheel bearing cup
^
The axle housing
2. Install the outer bearing into the wheel hub.
3. Install the outer bearing cup into the wheel hub.
4. Drive the outer bearing cup into the wheel hub using the J 44419 (2) and the J 8092 (1). Drive the outer bearing cup into the wheel hub until it is