Sierra Classic 1500 4WD V8-5.3L (2007)
4. Inspect the rear output shaft bushing for scoring or wear.
5. Remove the rear output shaft bushing if required, using the J 45380.
^
Install the finger section of the J 45380 in front of the bushing.
^
Install the tube and forcing screw to the finger section. Ensure the forcing screw is backed out.
^
Using a wrench on the forcing screw, remove the rear output shaft bushing.
Installation Procedure
1. Install a NEW rear output shaft bushing, if required, using the J 45380.
^
Install the bushing or the finger section of the J 45380.
^
Install the finger section to the main body of the J 45380.
^
Position the bushing and tool to the case.
^
Using a hammer and the J 45380, install the bushing.
