Sierra Classic 2500 2WD V8-6.6L DSL Turbo (2007)
10. Install the wiring harness bracket and bolt to the thermostat housing.
Tighten the bolt to 10 Nm (89 inch lbs.).
11. Install the wiring harness branch to the bracket and close the clip.
12. Install the radiator inlet hose to the water outlet tube.
13. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (w/RPO HP2) Draining
and Filling Cooling System (Vac-N-Fill).
14. Install the intake manifold cover.
