Sierra Classic 2500 2WD V8-6.6L DSL Turbo (2007)
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the fan clutch bolts
Tighten the bolts to 23 Nm (17 ft. lbs.).
3. Install the fan and engine cooling fan shroud assembly to the fan hub.
4. Use a J 41240-5A on the fan clutch hub nut (2) to install a long pry bar to the fan clutch hub (1).
Tighten the nut clockwise to 56 Nm (41 ft. lbs.).
5. Position the engine cooling fan shroud on the 3 mounting brackets (1).
6. Install the bolts. Loosely tighten the top mounting bolt at the oil filler neck.