Sierra Classic 2500 2WD V8-6.6L DSL Turbo (2007)
12. Remove the clip holding the positive cable to the engine front cover.
13. Remove the battery positive cable junction block to power steering pump bolt (1).
14. Move the generator positive cable and the junction block bracket aside.
15. Disconnect the generator electrical connector.
16. Disconnect the engine coolant temperature (ECT) sensor electrical connector.
17. Remove the air conditioning (A/C) compressor/power steering pump bracket bolts.
18. Reposition the A/C compressor/power steering pump bracket and secure to the side.
^
Do not remove the power steering pump from the bracket.
^
The hoses and battery cables can remain on the power steering pump.