Sierra Classic 2500 2WD V8-6.6L DSL Turbo (2007)
26. Connect the ECT sensor electrical connector.
27. Connect the generator electrical connector.
28. Position the A/C compressor, with the hoses attached.
29. Install the A/C compressor bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
30. Connect the A/C cut out switch electrical connector.
31. Connect the A/C compressor clutch electrical connector (5).
32. Install the drive belt.
33. Install the upper fan shroud.
34. Connect the negative battery cables.
35. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (w/RPO HP2) Draining
and Filling Cooling System (Vac-N-Fill).
36. Install the intake manifold cover.
