Sierra Classic 2500 2WD V8-6.6L DSL Turbo (2007)
10. If removed, install the oil pan skid plate bolts and plate.
Tighten the bolts to 20 Nm (15 ft. lbs.).
11. Install the water pump outlet pipe nuts at the coolant pipe.
Tighten the nuts to 25 Nm (18 ft. lbs.).
12. Install the left wheelhouse inner panel.
13. Install the left front tire.
14. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (w/RPO HP2) Draining
and Filling Cooling System (Vac-N-Fill).
