Sierra Classic 2500 2WD V8-6.6L DSL Turbo (2007)
1. Apply a 2 - 3 mm (0.79 - 0.118 inch) by 0.5 - 1.5 mm (0.02 - 0.06 inch) wide bead of sealant to the lower oil pan mating surface. Refer to
Sealers, Adhesives, and Lubricants for the correct part number.
2. Install the lower oil pan.
3. Install the lower oil pan bolts/nuts.
4. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the oil pan bolts/nuts in the sequence shown.
Tighten the bolts/nuts to 10 Nm (89 inch lbs.).
