Sierra Classic 2500 2WD V8-6.6L DSL Turbo (2007)
20. Remove the fuel rail bolts.
21. Remove the fuel rail.
INSTALLATION PROCEDURE
1. Install the fuel rail.
NOTE: Refer to Fastener Notice.
2. Install the fuel rail bolts.
Tighten the bolts to 25 N.m (18 lb ft).
3. NOTE: Ensure proper torquing of the fuel injector line. An under-torqued fuel injector line will not seal properly and an over-torqued fuel
injector line may damage the fuel injector fitting. An improperly sealed or damaged fuel injector line or fuel injector fitting will cause a fuel leak.