Sierra Classic 2500 2WD V8-6.6L DSL Turbo (2007)
3. Install the EGR coolant pipe.
4. Install the EGR coolant pipe bolts.
Tighten the bolts to 25 N.m (18 lb ft).
5. Install the EGR coolant pipe hose.
6. Position the EGR coolant pipe hose clamp.
7. Install the oil level indicator tube bracket and bolts.
Tighten the bolts to 21 N.m (15 lb ft).
8. Install the oil level indicator tube bolt.
Tighten the bolt to 21 N.m (15 lb ft).
9. Connect the fuel feed line quick connect fitting.
10. Install the water outlet tube.
11. Prime the fuel system. Refer to Fuel System Priming.
12. Start the engine. If the engine stalls, repeat the above step.
13. Once the engine starts, inspect for fuel leaks.
