Sierra Classic 2500 2WD V8-6.6L DSL Turbo (2007)
28. Install the right glow plug connectors to the glow plugs.
Tighten the glow plug connector nuts to 2 N.m (18 lb in).
29. Install the left glow plug harness bracket bolts.
Tighten the bolts to 10 N.m (89 lb in).
30. Install the left glow plug connectors to the glow plugs.
Tighten the glow plug connector nuts to 2 N.m (18 lb in).
31. Install the engine harness clip to the side of the air inlet tube.
32. Connect the MAP sensor electrical connector (2).
33. Connect the IAH electrical connector (1).
