Sierra Classic 2500 2WD V8-6.6L DSL Turbo (2007)
4. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the flywheel bolts in the proper sequence.
1. Tighten the bolts a first pass to 79 Nm (58 ft. lbs.).
2. Tighten the bolts a second pass to 60° using J 45059.
3. Tighten the bolts a final pass an additional 60° using J 45059.
5. Install the starter motor.
6. Install the clutch.
