Sierra Classic 2500 4WD V8-6.0L (2007)
Hood Hinge: Service and Repair
Hood Hinge Replacement
Hood Hinge Replacement
Removal Procedure
Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle
or personal injury.
1. Raise and support the hood.
2. Remove the hinge to the hood bolts.
3. Remove the hinge from the hood.
Installation Procedure
Notice: Refer to Fastener Notice .
1. Install the hinge to the hood bolts.
Tighten the hinge to the hood bolts to 25 N.m (18 lb ft).
2. Remove the hood support and lower hood.
