Sierra Classic 2500 4WD V8-6.0L (2007)
Notice: Refer to Fastener Notice .
3. Install the rear retaining bolts.
Tighten the bolts to 17 N.m (12 lb ft).
4. Install the tail lamp assembly. Refer to Tail/Turn Signal Lamp Replacement (Except Stepside) .
5. Install the screws in the wheelhouse attaching the fender to the box.
Tighten the screws to 2 N.m (18 lb in).
6. Install the bolts to the front of the fender.
Tighten the bolts to 17 N.m (12 lb ft).
