Sierra Classic 2500 4WD V8-6.0L (2007)
Cross-Member: Procedures
Damaged Cage Nut Service
Removal Procedure
Caution: Refer to Battery Disconnect Caution .
1. Remove the battery ground (negative) cable.
2. Remove the frame bolt (2) from the frame crossmember nut.
Important: The frame crossmember nut retainer will be reused if not damaged from the stripped out bolt.
3. Break away the spot welds (1) on one side of the frame crossmember nut retainer with an air chisel.
4. Lift one side of the frame crossmember nut retainer (enough to remove the frame crossmember nut).
5. Remove the frame crossmember nut.
Installation Procedure
1. Install the frame crossmember nut (2).
