Sierra Classic 2500 4WD V8-6.0L (2007)
1. Install the quarter panel.
Notice: Refer to Fastener Notice .
2. Install the quarter panel trim screws.
Tighten the quarter panel trim screws to 2 N.m (18 lb in).
3. Install the rear screw into the sill trim plate.
4. Install the rear window lower molding. Refer to Rear Window Lower Garnish Molding Replacement .
5. Install the jack and tool stowage.
6. Install the coat hook. Refer to Coat Hook Replacement .
Rear Window Lower Garnish Molding Replacement
Rear Window Lower Garnish Molding Replacement
Removal Procedure
1. Lightly pull the lower edge of the molding in order to release the clips. On extended cab fold the rear bench seat up. This will move the assembly
forward so that the molding can be accessed.
2. Lift the molding up and away from the glass in order to release the upper retainers.
Installation Procedure
1. Align the molding clips with the holes in the body panel along the back glass.
2. Snap the molding into place.
Windshield Pillar Garnish Molding Replacement
Windshield Pillar Garnish Molding Replacement
Removal Procedure
