Sierra Classic 2500 4WD V8-6.0L (2007)
Power Door Lock Switch: Service and Repair
Door Lock and Side Window Switch Replacement - Passenger Side
DOOR LOCK AND SIDE WINDOW SWITCH REPLACEMENT - PASSENGER SIDE
REMOVAL PROCEDURE
1. Remove the front door trim panel.
2. Remove the screw (2) that retains the switch panel bezel (1) to the front door trim panel.
3. Remove the switch panel bezel from the door panel using a flat-bladed tool.
4. Using a wide plastic flat-bladed tool, release the retaining clips on both sides of the door module.
5. Remove the door module from the switch panel bezel.
INSTALLATION PROCEDURE
