Sierra Classic 2500 4WD V8-6.0L (2007)
6. Remove the cable from the mounting bracket by depressing the locking tabs.
7. Remove the cable at the shock absorber bracket by removing the bolt.
8. Perform the following procedure to remove the cable (2) from the backing plate (4):
1. Compress the spring (3) by pushing towards the lever (1).
2. Depress the locking tabs.
3. Pull the cable housing out of the backing plate (4).
4. Remove the cable (2) through the slot in the backing plate.
9. Remove the park brake cable (2) from the lever (1).
10. Remove the cable from the vehicle.
Installation Procedure
1. Install the cable to the vehicle.
