Sierra Classic 2500 4WD V8-6.0L (2007)
8. For all 15 series vehicles, pull down on the park brake cable in front of the equalizer and install the left park brake cable to the equalizer bar.
9. Remove the safety stands.
10. Remove the safety stands and lower the vehicle.
11. Adjust the park brake cable. Refer to Park Brake Adjustment (w/Rear Disc) Park Brake Adjustment (w/Rear Drum).
Parking Brake Rear Cable Replacement - Left Side (W/Rear Drum)
Parking Brake Rear Cable Replacement - Left Side (w/Rear Drum)
Tools Required
^
J 37043 Park Brake Cable Release Tool
Removal Procedure
Caution: Refer to Brake Dust Caution.
Caution: Refer to Brake Fluid Irritant Caution.
1. Ensure that the park brake is released.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Relieve tension on the park brake cables by pulling down on the front park brake cable (1) just in front of the equalizer.
4. Remove the left rear park brake cable (3) from the equalizer bar.
