Sierra Classic 2500 4WD V8-6.0L (2007)
4. Install the cable to the mounting bracket until the locking tabs snap into place.
5. Notice: Refer to Fastener Notice in Service Precautions.
Bolt the cable to the differential clips.
Tighten the bolt to 22 Nm (16 ft. lbs.).
6. Important: After installing the cable to the rear axle holding clip, verify that clip is securely retaining the cable. If not, crimp the clip by hand
taking care not to pinch or kink the cable.
Install the cable to the differential clip.
7. For 25/35 series vehicles, connect the cable at the equalizer.
8. For 25/35 series vehicles, enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling (w/Rear Disc).
