Sierra Classic 2500 4WD V8-6.0L (2007)
Install the cooling fan and shroud.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the cooling fan shroud bolts.
Tighten the bolts to 9 Nm (80 inch lbs.).
3. If equipped, install the cooler lines to the clip and close the clip.
4. Connect the electrical connectors to the cooling fans.
5. Install the clip attaching the wiring harness to the shroud.
6. Install the surge tank inlet hose to the radiator.
7. Reposition the surge tank inlet hose clamp at the radiator.
