gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Evaporative Emission Canister Vent Solenoid Valve Replacement (Pickup)|Page 9522 > < Evaporative Emission Canister Vent Solenoid Valve Replacement (Pickup)

Sierra Classic 2500 4WD V8-6.0L (2007)

Page 2
background image

7. If the vehicle is equipped with a 8 ft box, disconnect the EVAP CVS line from the canister.
8. Remove the CVS clip from the frame crossmember.
9. Push in the retainer and remove the CVS from the fuel tank clip.

10. If the vehicle is equipped with a 5 ft 8 in box, disconnect the EVAP CVS electrical connector.
11. Disconnect the EVAP CVS line (3) from the canister.
12. Remove the CVS clip (2) from the frame.
13. Remove the CVS bracket bolt (1), if required otherwise push in the retainer and remove the CVS from the bracket.

INSTALLATION PROCEDURE

NOTE:  Refer to Fastener Notice.

Evaporative Emission Canister Vent Solenoid Valve Replacement (Pickup)|Page 9522 > < Evaporative Emission Canister Vent Solenoid Valve Replacement (Pickup)