gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank (Pickup and Cab/Chassis)|Page 9538 > < Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank (Pickup and Cab/Chassis)|Page 9536

Sierra Classic 2500 4WD V8-6.0L (2007)

Page 3
background image

1. Install the fuel and EVAP bundle.

NOTE:  Refer to Fastener Notice.

2. Install the fuel and EVAP bundle nuts.

Tighten the nuts to 12 N.m (106 lb in).

3. Remove the caps from the fuel and EVAP lines at the fuel tank.
4. Connect the fuel and EVAP quick connect fittings.

Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank (Pickup and Cab/Chassis)|Page 9538 > < Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank (Pickup and Cab/Chassis)|Page 9536