Sierra Classic 2500 4WD V8-6.0L (2007)
1. Install the fuel/EVAP bundle.
NOTE: Refer to Fastener Notice.
2. Install the fuel/EVAP bundle clip nuts.
Tighten the nuts to 12 N.m (106 lb in).
3. Remove the caps from the fuel and EVAP lines.
4. Connect the fuel line at the tank.
5. Install the EVAP canister.
6. Install the torsion bar bracket, if equipped with 4WD.
7. Install the EHCU (1).
8. Install the bolts (4) attaching the EHCU bracket to the frame (5).
Tighten the bolts to 25 N.m (18 lb ft).
9. Connect the brake lines to the BPMV.
Tighten the fittings to 25 N.m (18 lb ft).
