gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

4L60-E/4L65-E/4L70-E - Automatic Transmission|Page 11183 > < 4L60-E/4L65-E/4L70-E - Automatic Transmission|Page 11181
Page 1
background image

Pressure Regulating Solenoid: Service and Repair
4L80-E/4L85-E - Automatic Transmission

Pressure Regulator Replacement 

Tools Required

^

J 36850 Transjel(r) Lubricant

Removal Procedure

1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the transmission filter. Refer to Automatic Transmission Fluid and Filter Replacement.

3. Caution:  

Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result. 

Remove the reverse boost valve bushing retainer ring (2).

4. Remove the following from the reverse boost valve cylinder:

^

The reverse boost valve bushing

^

The reverse boost valve

^

The pressure regulator spring retainer

^

The pressure regulator spring

^

The pressure regulator valve

^

The reverse boost valve bushing

Installation Procedure

1. Install the pressure regulator valve using J 36850.

4L60-E/4L65-E/4L70-E - Automatic Transmission|Page 11183 > < 4L60-E/4L65-E/4L70-E - Automatic Transmission|Page 11181