Sierra Classic 2500 4WD V8-6.0L (2007)
keypad will NOT reset this version of the OnStar(R) system. This action will cause a DTC to set.
15. Install the scan tool. Use the special functions menu in order to perform the OnStar(R) setup procedure for this vehicle.
16. Move the vehicle to an open area that is away from tall buildings and with a clear view of unobstructed sky. Allow the vehicle to run for 10
minutes.
17. Use the ID information menu on the scan tool to access the new station ID (STID) and the electronic serial number (ESN) from the new VCIM.
18. Press the blue OnStar(R) button to connect to the OnStar(R) Call Center and perform the following procedure:
1. Tell the advisor that this vehicle has received a new VCIM.
2. Ask the advisor to add the new STID and the ESN to update the customer's account.
3. Follow any additional instructions from the OnStar(R) advisor.
4. Ask the advisor to activate the OnStar(R) Personal Calling feature, if available.
19. The default language for voice recognition in the generation 5 OnStar(R) module is English. To change the language resident in the module, Refer
to OnStar Reconfiguration (w/o SPS Programming). See: Accessories and Optional Equipment/Testing and Inspection/Programming and
Relearning/OnStar Reconfiguration (w/o SPS Programming)
20. Refer to Control Module References for programming and setup information. See: Testing and Inspection/Programming and Relearning
