Sierra Classic 2500 4WD V8-6.0L (2007)
22. If equipped with a 8.1L engine, remove the starter lead nut.
23. Remove the positive cable from the starter.
24. Remove the positive cable clip nut.
25. Remove the positive cable from the engine harness clip.
26. Remove the positive battery cable.
Installation Procedure
1. If equipped with a 8.1L engine, install the positive battery cable.
2. Install the positive cable to the engine harness clip.
Notice: Refer to Fastener Notice.
3. Install the positive cable clip nut.
Tighten the nut to 8 N.m (71 lb in).
4. Install the positive cable to the starter.
5. Install the starter lead nut.
Tighten the starter lead nut to 9 N.m (80 lb in).
6. If equipped with a 4.8L, 5.3L, or 6.0L engine, install the positive battery cable.
7. Install the positive cable to the clip on the oil pan.
8. Install the positive cable clip to the clip on the oil pan.
9. Install the positive cable to the starter.
10. Install the starter lead nut.
Tighten the nut to 9 N.m (80 lb in).
