Sierra Classic 2500 4WD V8-6.0L (2007)
Starter Heat Shield: Service and Repair
Starter Shield Replacement
Removal Procedure
1. Remove the starter motor.
2. If equipped with a 4.8L, 5.3L, or 6.0L engine, remove the starter heat shield.
3. If equipped with a 8.1L engine, remove the starter heat shield bolts, and nut.
4. Remove the starter heat shield.
Installation Procedure
1. If equipped with a 8.1L engine, install the starter heat shield.
Notice: Refer to Fastener Notice.
2. Install the starter heat shield bolts, and nut.
* Tighten the bolts to 3 N.m (35 lb in).
* Tighten the nut to 5 N.m (44 lb in).
* If equipped with a 4.8L, 5.3L, or 6.0L engine, install the starter heat shield.
* Install the starter motor.
