Sierra Classic 2500 4WD V8-6.0L (2007)
7. Connect lower ball joint stud to the steering knuckle.
8. Install the retaining nut to the lower ball joint stud.
Tighten the nut to 100 Nm (74 ft. lbs.).
9. Install the torsion bars.
10. Install the shock absorber lower nut and bolt.
11. Install the stabilizer shaft links to the lower control arm.
12. Install the tire and wheel.
13. Remove the safety stands.
14. Lower the vehicle.
15. Align the vehicle. Refer to Measuring Wheel Alignment.
